Uni-Coat 5000 GF
Description: Uni-Coat 5000 GF is a two-component, solvent free, 100% solid, Glass flake reinforced protective coating, formulated with special selected epoxy combinations, chemically inert pigments and additives. Due to the enrichment with micronized ECR glass flake for the reduction of moisture vapour transmission, improved mechanical properties and enhanced tribological properties. Can be applied directly on […]
Uni-Coat 5000 Zn
Description: Uni-Coat 5000 Zn is a two-component, solvent free, 100% solid, corrosion resistant, zinc primer. Can be applied to damp surfaces. VOC Free No dew point restrictions Excellent corrosion protection Outstanding abrasion and chemical resistance Excellent abrasion resistant Discolours in direct sunlight! Recommended Uses: Primer for protection of steel surfaces. Developed for environments where high […]
Uni-Coat 5000 SUB
Description: Uni-Coat 5000 Submersed is a two-component, solvent free, 100% solid, epoxy based underwater putty/coating, formulated from special selected epoxy combinations, and it is glass flake reinforced. The system exhibits excellent abrasion resistance and is able to withstand severe physical stress caused by wave action and on top of that the system is resistant to […]
Uni-Coat 5000 SUB-K
Description: Uni-Coat 5000 Submersed-K is a two-component, solvent free, 100% solid, epoxy based underwater coating, formulated from special selected epoxy combinations, and it is glass flake reinforced. The system exhibits excellent abrasion resistance and is able to withstand severe physical stress caused by wave action and on top of that the system is resistant to […]
Uni-Coat 5000 MIOX
Description: Uni-Coat 5000 Miox is a two-component, solvent free, 100% solid, epoxy based intermediate coating, pigmented with a high load of micaceous iron oxide (MIO) which exhibits excellent barrier protection. The plate-like structure of MIO provides protection of sharp edges, corners, and welds. Ideal for maintenance painting and fabrication shop application. Can be applied directly […]
Uni-Coat 5000 MT
Description: Uni-Coat 5000 MT is a two-component, solvent free, 100% solid, epoxy based protective coating, formulated from special selected epoxy combinations, chemically inert pigments and additives. Can be applied directly on damp surfaces. VOC Free No dew point restrictions Outstanding resistant against chemicals and solvents Excellent adhesion and abrasion resistance Discolours in direct sunlight! Recommended […]
Uni-Coat 5000 Flex
Description: Uni-Coat 5000 FLEX is a two-component, solvent free, 100% solid, protective coating, formulated with special selected Epoxy/PU combinations, chemically inert pigments and additives. Through the addition of a special designed Polyurethane is the coating permanent flexible. VOC Free Excellent Adhesion Excellent resistant against different chemicals and solvents Outstanding application properties Permanently flexible Excellent abrasion […]
Uni-Coat 4000 Si Soft Flex
Description: Uni-Coat 4000 Si Soft Flex is a premium, liquid applied, permanent elastic, cold applied and colt curing, single component moisture-triggered, silane, aliphatic membrane used for long-lasting waterproofing witch is applicable in humid conditions. Simple application (roller or airless spray, with trained personnel) When applied forms seamless membrane without joints Excellent long-term resistant to natural […]
Uni-Coat 4000 Sf Glass Finish
Description: Uni-Coat 4000 Sf Glass finish is a duo component, moisture-curing, silane-fuctional, aliphatic polyurethane finish based on an aliphatic branched polyester, enriched with micronized ECR glass flake for the reduction of moisture vapour transmission, improved mechanical properties and enhanced tribological properties. Excellent adhesion to most substrates Low temperature application – down to 0°C Excellent durability […]
Uni-Coat 4000 Safety HD
Description: Uni-Coat 4000 Safety HD is a Three-component solvent free, 100% solid, Polyurethane system which in combination with an aggregate dressing provides a flexible, impervious and high friction anti-skid surface. The flexible design of the cured system allows it to move and flex with the structure applied on and it deflects under load. Excellent adhesion […]